Truck Licence QLD: Classes, Costs and How to Get One

Getting a truck licence in QLD is mostly about time and the right order. You can’t jump straight from a car licence to driving road trains. You work up through the classes, holding each one for a set period, and pass a practical test with the Department of Transport and Main Roads (TMR) along the way.

This guide covers each heavy vehicle class, how long you need to wait between them, the steps to apply, what it costs, and the rules for MC licences and interstate or overseas drivers. Everything is based on TMR’s own requirements as of October 2026. If you’re licensed in another state, our heavy vehicle licence guide covers the national picture.

Truck licence classes in QLD

Queensland uses the same five heavy vehicle classes as the rest of Australia. Each class also covers everything in the classes below it.

Class What you can drive
LR (Light Rigid) A truck or bus over 4.5 tonnes and up to 8 tonnes GVM, or a vehicle up to 8 tonnes seating more than 12 adults including the driver. You can tow a trailer up to 9 tonnes GVM
MR (Medium Rigid) A truck or bus over 8 tonnes GVM with 2 axles, plus a trailer up to 9 tonnes GVM
HR (Heavy Rigid) A truck or bus over 8 tonnes GVM with 3 or more axles, plus a trailer up to 9 tonnes GVM. Also covers articulated (bendy) buses
HC (Heavy Combination) A prime mover with a semi-trailer, or a truck towing a trailer over 9 tonnes GVM
MC (Multi Combination) B-doubles and road trains

Once you upgrade, you get a magenta-coloured licence showing your highest class.

If you’re not sure which class you need, check the GVM on the vehicle’s compliance plate and count the axles. For most local delivery jobs, MR or HR is enough. Linehaul work with semi-trailers needs HC, and B-doubles need MC.

How long you need to hold your licence first

Before you can apply for a higher class, you need to have held your current licence (provisional or open) for a minimum time:

You hold For at least You can go for
C (car) 1 year LR or MR
C (car) 2 years HR
LR or MR 1 year HR
MR or HR 1 year HC
HR or HC 1 year MC

Two details that trip people up:

  • The time must fall within the last 5 years. It can be one continuous stretch or several shorter periods added together, but any time your licence was suspended, cancelled, surrendered or expired doesn’t count.
  • You can’t skip MR or HR to get to HC. HC needs a year on MR or HR. The only exception is a special-need HC licence for people in remote parts of Queensland who need it for work and can’t get access to an MR truck to learn on.

So the fastest path from a car licence to MC is about three years: one year on C, then MR, one year later HC, and one year after that MC.

How to get a truck licence in QLD, step by step

For LR, MR, HR and HC, the process is the same. (MC works differently; see the upgrading section below.)

  1. Check you’re eligible. Make sure you’ve held your current class long enough (see the table above). If some of that time was on an interstate or overseas licence, contact TMR on 13 23 80 before you book anything, as they may need to verify your history.
  2. Learn with a supervisor. Once you hold a provisional or open licence, you’re allowed to learn the next class up. Your supervisor must hold an open licence in that class and have held it for at least a year. You need L plates on the front and rear, a zero alcohol limit, and your licence on you. Driving unaccompanied while learning means 4 demerit points and a fine of over $270.
  3. Get some training. It isn’t compulsory for LR to HC, but most people take lessons with a heavy vehicle driving school, often using the school’s truck for the test too.
  4. Sit the road rules test, if required. There’s a written road rules test for heavy vehicles, with a small fee.
  5. Declare you’re medically fit. You’ll need to declare that you’re fit to drive the higher class. If you have a medical condition that could affect your driving, you’ll need a certificate from your doctor.
  6. Book and pass the practical test. Book online or call 13 23 80, and pay the test fee. The LR test takes around 45 minutes, while tests for the higher classes take about 90 minutes.
  7. Get your new licence. Once you pass, your licence is re-issued with the new class. You don’t need a form at a TMR customer service centre, though police stations and most QGAP offices still ask for form F3000. Your magenta licence arrives in the mail within 21 days.

The full requirements are on the Queensland Government’s upgrading a licence page.

What a truck licence in QLD costs

The government fees are the small part:

Fee Approximate cost
Written road rules test (heavy vehicle) $28.70
Practical driving test (any class) $67.15

These figures come from LTrent’s summary of TMR fees. TMR fees usually rise each 1 July, so check the official Queensland licence fees page before you budget.

The real cost is training. Driving school prices vary a lot depending on the class, how many lessons you need, and whether you hire the school’s truck for the test. Get quotes from two or three schools. For MC, the training is compulsory unless you qualify for the experience pathway (see below), so build it into your plan.

If your employer needs you upgraded for a job, ask whether they’ll cover the training. Many transport companies do, especially when they’re short of HC and MC drivers.

Upgrading to HR, HC and MC

Moving from MR to HR, or from HR to HC, follows the same seven steps above: wait your year, learn with a supervisor, then pass the practical test.

MC is different. TMR doesn’t run practical tests for MC. Instead, after holding HR or HC for at least a year, you qualify through training or experience:

You hold What you need to do
HR Complete the unit Drive Multi-combination Vehicle (TLIC4006) with a TMR-approved MC training provider, with at least 16 hours of training and assessment
HC Either complete the same unit with at least 8 hours of training and assessment, or submit a multi-combination driving experience declaration (form F3272) signed by your employer, with evidence of regular and substantial MC driving at work

You then take your statement of attainment (or the declaration) to TMR with your ID, complete form F3000, declare you’re medically fit, and pass an eyesight test if required.

Special-need HC licence. If you live in a remote or very remote part of Queensland, hold a C or LR licence, need HC for work, and can’t access an MR truck to learn on, you may be able to go straight to HC. You apply with form F3759 and proof of where you live.

Each step up usually means better pay. Our truck driver salary guide breaks down what drivers earn by class and state.

Moving to Queensland with an interstate or overseas licence

From another Australian state. Your heavy vehicle class transfers when you change to a Queensland licence. If you’re planning to upgrade and some of your waiting time was on the interstate licence, call TMR on 13 23 80 before you book a test so they can confirm your history counts.

From overseas. It depends on where your licence was issued:

  • New Zealand. If you hold, or held in the last 5 years, an equivalent NZ heavy vehicle licence, you usually only need to pass the heavy vehicle road rules test. No practical test.
  • Recognised countries. You first get a Queensland car licence by passing the road rules and practical tests. Then you pass the heavy vehicle road rules test and the practical test for the class you want.
  • Other countries. Expect to sit the road rules test and a practical driving test.

The country lists change from time to time, so check TMR’s overseas licence transfer page for your country before you plan anything. We also cover the wider picture in our guide to converting an international licence in Australia.

Once you’ve got your truck licence: the rules that come with it

Your licence class is only the start. Once you drive a truck over 12 tonnes GVM, which includes many MR and most HR, HC and MC vehicles, you’re driving a fatigue-regulated heavy vehicle under the Heavy Vehicle National Law. That brings three things new drivers often aren’t ready for:

• Work and rest limits. Under Standard Hours, a solo driver can work up to 12 hours in any 24-hour period, with at least 7 continuous hours of stationary rest. See our guide to work and rest hours for the full limits.
• A work diary. If you drive more than 100 km from your base, you need to record your hours. Our guide to the logbook for truck drivers explains who needs one and how it works.
• Fitness to drive. Since 1 August 2026, you must not drive any heavy vehicle over 4.5 tonnes GVM if you’re unfit to drive safely, whether from fatigue, illness, medication or anything else.

Many operators now use an electronic work diary instead of the paper book. Manage Vehicle’s MV Driver is NHVR approved and records your work and rest as you go, so you always know when your next break is due.

FAQs

How long does it take to get a truck licence in QLD?

You need a car licence for at least 1 year before LR or MR, and 2 years before HR. From there, each step up needs another year. The fastest path from a car licence to MC is about three years.

Can I go straight from a car licence to HR?

Yes, once you’ve held your car licence (provisional or open) for at least 2 years. You don’t have to get LR or MR first.

What’s the biggest truck I can drive on a car licence?

A class C licence covers vehicles up to 4.5 tonnes GVM. Anything heavier needs at least an LR licence.

Do I need a medical for a truck licence?

You need to declare that you’re medically fit to drive the higher class. If you have a medical condition that could affect your driving, you’ll also need a certificate from your doctor.

Is there a practical test for an MC licence in Queensland?

No. TMR doesn’t run MC tests. You qualify by completing approved MC training (16 hours if you hold HR, 8 hours if you hold HC), or, for HC holders, through an employer-signed experience declaration.

Is it truck licence or truck license?

In Australia the noun is spelt “licence”, but people search for both. They mean the same thing, and the rules here apply either way.

Sources

Current Scenario of International Driving Conversion in Australia

International driving conversion among truck drivers has become a serious challenge for Australia, given that its trucking industry suffers from a severe driver shortage.

Seeing the outdated practices and systemic issues in the trucking industry deters drivers from straining this critical economic sector in the first place.

With over 26,000 vacancies threatening the supply chain, Australia is revising its international driving conversion process by [implementing stricter training and licensing requirements and promoting fair treatment of all drivers] to tackle the crisis.

Let’s take a glimpse of the current scenario of the trucking industry below:

Current Scenario of International Driving Conversion in Australia

The Australian trucking industry faces the most burning issue today: the severe disruption from a critical driver shortage.

These factors result in delays to the shipment of goods, leading to an ever-expanding explosion in the cost of freight and, ultimately, all the ripple effects throughout the economy.

The intense compliance practices, unprepared training of international drivers and discontent from local truck drivers worsen the plight.

A Looming Crisis

On December 12, Big Rigs Newspaper highlighted the case of Greg Davies, a seasoned truck driver fined $580 for failing to record a date in his logbook.

This situation was neglecting an obvious mistake during the time of taking care of his wife after she had recently suffered a heart attack.

Despite his clean record, compliance officers displayed no leniency, issued a fine, and treated him with hostility.

Greg Davies’ story resulted in one bitter incident among truck drivers, with many commenting that it discourages newcomers and makes many leave the field.

Community Feedback: Voices of Truck Drivers

Manage Vehicle’s Facebook page, Truckers Australia shared a comment from former truckie Roy Bate, who quit the industry citing poor conditions and the lack of skilled international driving conversions:

“This sort of thing is why I gave the game away. No wonder younger people don’t want to do the job. The more things change, the more they stay the same.”

The post garnered significant attention, with many Aussies sharing their views.

Feedback from the Aussies

Annmarie Close proposed a temporary requirement that an experienced Australian driver should drive foreign drivers for three months before allowing them to drive alone.

Others echoed similar sentiments, emphasising emphasising stricter training and licensing requirements.

Discussions on Reddit

Redditors also weighed in on the challenges in the trucking industry:

  • Nuclearwormwood highlighted that driver shortages have turned heavy vehicle operations into low-wage jobs in Western Australia.
  • Outrageous_Ranger619 criticised companies offering licenses to international drivers with minimal training, putting road safety at risk.
  • Repsol93, a veteran truck driver, stated that wage disparities exist between union and nonunionized companies and that poor salaries and conditions keep drivers from staying in the industry.

The overarching sentiment is clear: addressing driver shortages requires fair wages, improved training standards for international drivers, and a more respectful approach toward truckies from compliance officers.

Now, let’s hear the other side of the story!

Racism in Australian Trucking: The Issue of ‘Aussie Banter’

Big Rigs Newspaper recently published a story by Jaswinder Boparai regarding the disturbing plight of immigrant truck drivers in Australia.

Jaswinder has been driving trucks across Australia since 2014, with most of his work involving interstate routes. Throughout these years, he has maintained an impeccable driving record, free from accidents or other incidents.

He has always adhered to the rules and regulations of the road.

Many other Indian-origin drivers like Jaswinder Boparai also maintain excellent records – far outnumbering the ‘bad apples.’

Jaswinder has been safe and responsible with his driving for years but has continually faced a painful issue that has devastated and infuriated him. Moreover, he has faced constant racism directed at Indian-origin truck drivers.

This racism is not an occasional occurrence; it happens daily. Jaswinder often keeps his truck’s radio off because people frequently hijack the UHF channels, which should be used for important road information, to hurl racist slurs instead.

Jaswinder has been the target of derogatory names such as ‘towelhead,’ ‘black c**t,’ and ‘curry muncher’ by others. The abuse extends beyond the radio and is rampant on social media as well.

The UHF radio, made to guarantee safety and communication, has become a platform for hate speech against Indian-origin drivers. Facebook groups engage in this toxic behaviour daily without doing anything to deter it.

Under the guise of ‘Aussie banter,’ [which often includes derogatory and racist remarks], this racism is left unchecked and unchallenged.

Addressing the Problem: A Call to Action

Jaswinder heartily appreciated the National Road Freighters Association (NRFA) for speaking up and recognising the fight against discrimination meted out to Indian-origin drivers. However, he emphasised the urgent need for a collective response:

  • Blaming Stereotypes: The weird habit of UHF radio users always attributing faults to Indian drivers in road incidents is evidence of this trend. Such blanket blame is neither fair nor constructive.
  • Industry Accountability: Jaswinder called for authorities and industry leaders to actively condemn such behaviour and address these issues in driver training programs.
  • Promoting Inclusion: He urged stakeholders to engage with the Indian-Australian community and truck driver associations to understand the challenges better and develop targeted solutions.

“Racism, indeed, is a defilement of fundamental human rights, and it flaunts the principles of diversity, inclusion as well as equality that Australia itself boasts about.

Addressing this issue should be a priority, and by promoting respect and addressing these concerns within the trucking industry, we can create a safer and more inclusive environment for all drivers,” Jaswinder says.

This side of the story was part of a speech delivered by Jaswinder, a Melbourne-based fleet owner and NRFA member, during an industry roundtable at Parliament House on September 6, 2024, under the theme ‘Keeping Our Roads and HV Drivers Safe.’

By amplifying voices like Jaswinder’s, the trucking industry can work towards meaningful change and rebuild its reputation as an inclusive and equitable field.

How International Driving Conversion Manages Foreign Licenses?

Driving heavy vehicles in Australia with an international driver’s license involves meeting specific requirements and complying with the Heavy Vehicle National Law (HVNL).

This process guarantees safety for all road users and sets the stage for the future facilitation of foreign drivers into the Australian transport system. Furthermore, that is how the conversion process effectively manages everyone:

Requirements for International Drivers

Valid International Driver’s License (IDL)

Foreign drivers must possess a valid IDL along with their overseas license. An official translation is required if the original license is not in English. This ILD ensures clarity and uniformity for law enforcement and regulatory bodies.

Vehicle Class Alignment

The type of heavy vehicle operated should correlate with the IDL classification. Vehicle classes include Light Rigid (LR), Medium Rigid (MR), Heavy Rigid (HR), Heavy Combination (HC), and Multi Combination (MC).

Proper alignment means drivers will be skilled enough to operate the vehicles assigned to them safely.

License Validity Period

However, an international driver’s permit can be valid for 3 months in Australia. After this time frame, they must obtain a local license through knowledge testing and practical assessments to help them understand Australian road laws.

Understanding HVNL for Effective Operations

Awareness of Road Laws

Local traffic regulations differ from state to state and territory to territory. Drivers should then take the time to learn and know these variations to avoid suffering legal ramifications and to guarantee the safety of motoring in that place.

Knowledge Tests and Compliance

The conversion procedure usually involves examining HVNL, such as ensuring drivers understand the following:

  • Chain of Responsibility (CoR): Extending accountability across the transport supply chain.
  • Safe Driving Plans: Mandated for long-distance heavy vehicle operations.
  • Fatigue Management: Regulated through logbook requirements.

Roadworthiness and Load Security

All drivers should take care of their vehicles and keep them in a roadworthy condition for safer driving on their parts, avoiding accidents due to a shift in load as per the Load Restraint Guide.

Benefits of International Driving Conversion

By mandating compliance with HVNL and other local regulations, the conversion process provides:

  • Road Safety Increase: All drivers function according to Australian standards.
  • Simplified Legal Procedures: Clear the air about doubts regarding the veracity of foreign and foreign licenses.
  • Enhanced Professional Standards: Promoting responsible driving among heavy vehicle drivers.

Access to resources like the National Heavy Vehicle Regulator (NHVR) further supports drivers in transitioning smoothly into the Australian driving system, making the conversion process a cornerstone of proper management.

Australia’s International Driver Licence Conversion — Who Will It Impact?

Australia plans to change the procedure regarding international driver’s licenses by the year twenty-twenty-five.

Thus, specific overseas residents seeking to transfer their licences to Australian ones must obtain an Australian licence. Changing this would not affect visitors who currently hold valid overseas licences.

Key Points:

  1. The overseas licence conversion process will change in 2025.
  2. Licence holders from certain countries will need to undergo additional training and testing.
  3. These updates will not impact visitors driving with overseas licences.

How Does the Current System Work?

Permanent residents from recognised countries can now convert their overseas-issued licenses to Australian dwell at set qualifications under the present Recognised Country Scheme.

As Austroads defined, this scheme usually allows for less hassle in processing applicants from recognised overseas countries and may have exemptions from additional testing.

  • Recognised Country Status: Individuals from these countries can transfer their car or motorcycle licences without taking knowledge or driving tests.
  • Experienced Driver Recognition Status: Drivers from countries meeting partial requirements are eligible for this status. If they are over 25, they may convert their licences without further training or testing.

Drivers from countries outside these categories, or those under 25 holding licences from experienced driver countries, must undergo testing to acquire an Australian licence.

What Is Changing with the International Driving Conversion in Australia?

Most Australian states and territories will phase out the Experienced Driver Recognition status starting April 30, 2025, with a nationwide rollout expected in subsequent months.

This change means:

  • Drivers from countries with Experienced Driver Recognition status will no longer benefit from streamlined conversions.
  • Before the scheme ends, they must transition to Australian licences or face further training and testing requirements.
  • Austroads has encouraged countries currently under the Experienced Driver Recognition category to apply for Recognised Country Status. Also, to ensure smoother transitions for their drivers.

Visitors are Exempt from These Changes

The changes will not apply to visitors in Australia who hold a valid overseas licence. Visitors can continue driving on Australian roads, provided they meet the conditions of their overseas licence.

“These changes do not apply to visitors to Australia who will continue to be able to drive on Australian roads if they hold a valid overseas licence and comply with all conditions of that licence,” said Geoff Allan, Austroads CEO.

By reinforcing the conversion process, Australia aims to improve road safety standards. Meanwhile, each state or territory will start to maintain a fair system for residents and visitors navigating its roads.

Improving International Driving Conversion for a Stronger Supply Chain

Most upcoming changes in the international driving conversion process leading to Australia are a commitment to safety. But, this must not apply without care since it can deepen a shortage of drivers.

Such discrimination would have to be addressed systemically along with all other rigidity of regulation associated with the suppression of wages.

The trucking industry would much better attract and retain local and international drivers in Australia if it created this supportive and inclusive atmosphere. Similarly, it was about ensuring the supply chain’s resilience.

For individuals seeking to convert their overseas licences, contacting the licensing authority in their respective state or territory is advisable for detailed information on the new requirements.

Interesting: ZEV Rebate Scheme Gains $9.5M Boost from Western Australia

How to Get a Heavy Truck Driving License in Australia?

A heavy vehicle licence lets you drive trucks and buses over 4.5 tonnes GVM in Australia. There are five classes, from Light Rigid (LR) up to Multi Combination (MC), and you work your way up them one step at a time. Each class needs a minimum time on the licence below it.

Licences are issued by each state and territory, not by a national body. The classes and the basic steps are the same everywhere, though, so once you understand them, the process in your state is easy to follow. This guide covers what each class lets you drive, who’s eligible, the steps to get or upgrade your licence, and what’s different in each state.

Heavy vehicle licence classes at a glance

Class What you can drive You must have held
LR (Light Rigid) Rigid trucks over 4.5 t and up to 8 t GVM, and buses over 4.5 t GVM up to 8 t, or carrying more than 12 adults including the driver A car (C) licence for 1 year
MR (Medium Rigid) Rigid trucks and buses with 2 axles over 8 t GVM A car (C) licence for 1 year
HR (Heavy Rigid) Rigid trucks and buses with 3 or more axles over 8 t GVM, and articulated buses A car (C) licence for 2 years, or an LR or MR licence for 1 year
HC (Heavy Combination) Prime movers towing a single semi-trailer, and rigid trucks towing a trailer over 9 t GVM An MR or HR licence for 1 year
MC (Multi Combination) B-doubles and road trains An HR or HC licence for 1 year

Each class also covers everything in the classes below it. With LR, MR and HR, you can also tow a trailer of up to 9 t GVM.

WA adds an extra rule for the top two classes. You also need to have held a car licence for at least 3 years before you can get an HC or MC licence.

Heavy vehicle licence classes in Australia from LR to MC

What licence do I need to drive a truck?

It depends on the truck’s weight, number of axles and whether it’s towing. A few common examples:

  • A small delivery truck or a 7 t rigid: LR
  • A 2-axle rigid truck, like a standard tipper or curtainsider: MR
  • A 3-axle rigid truck, like a big tipper, concrete agitator or garbage truck: HR
  • A semi-trailer (prime mover and one trailer): HC
  • A B-double or road train: MC

If you’re not sure, check the GVM and axles on the truck’s compliance plate, or ask the operator which class they need. Most employers list the licence class in the job ad.

How to get a heavy vehicle licence

The steps are much the same in every state:

  1. Check you’re eligible. Make sure you’ve held the licence below for long enough (see the table above). Time on a learner licence doesn’t count.
  2. Pass the heavy vehicle knowledge test. This is a computer-based theory test on road rules and heavy vehicle safety, done at your state’s licensing centre.
  3. Pass an eyesight test and meet the medical standards. Tell your licensing authority about any medical condition that could affect your driving.
  4. Do your training and practical assessment. Most people do this with a registered training provider, through a competency-based assessment. In some states you can also sit a driving test with the licensing authority.
  5. Apply and pay at your licensing centre to get the new class added to your licence.

The gearbox you train in matters. If you pass your assessment in an automatic or synchromesh truck, your licence will usually carry a condition limiting you to those gearboxes. To drive trucks with a constant mesh (crash) gearbox, you’ll need to be assessed in one.

How to get a heavy vehicle licence in Australia, step by step

Heavy vehicle licence rules by state

The classes and holding times above apply across Australia. What changes from state to state is who runs the tests, how you book them and a few extra rules.

State Licensing authority Worth knowing
NSW Transport for NSW and Service NSW Most upgrades are done through a Heavy Vehicle Competency Based Assessment (HVCBA) with an approved provider. MC is done through the HVCBA
QLD Department of Transport and Main Roads TMR doesn’t run practical tests for MC. You upgrade through an approved training provider instead
VIC Department of Transport and Planning (VicRoads) Upgrades combine a knowledge test with training and assessment by a registered provider
WA Department of Transport HC and MC also need a car licence held for at least 3 years, and HC isn’t available on a provisional licence
SA Department for Infrastructure and Transport You apply through mySA GOV, with a knowledge test and practical assessment
TAS Department of State Growth Training and assessment with an accredited heavy vehicle instructor
ACT Access Canberra A knowledge test, then a practical assessment with an approved assessor
NT Motor Vehicle Registry A theory test, then a practical assessment with an accredited assessor

For the full process in your state, see our guide to the truck licence in QLD, or go to your state’s official page: NSW, QLD, VIC, WA, SA, ACT or NT.

Truck license or truck licence?

Both spellings get searched, but in Australia it’s licence for the card (a noun) and license for the verb, as in “you’re licensed to drive”. Government sites, employers and job ads all use “heavy vehicle licence”. So if you’re searching for a truck license in Australia, you’re looking for the same thing.

What happens after you get your licence?

Your heavy vehicle licence gets you in the door. The next steps are experience and building up through the classes. Most drivers start on rigid trucks, then step up to HC and MC as they gain time and confidence. Each step up opens better-paid work. Our guide to truck driver salary in Australia shows what each licence class typically earns.

Once you’re driving, you’ll also need to know the work and rest hours rules, and when you need a work diary. It’s also worth reading up on the day-to-day responsibilities of a truck driver.

Frequently asked questions

What licence do I need to drive a truck?

It depends on the truck. Small rigid trucks up to 8 t GVM need an LR licence. Two-axle rigids over 8 t need MR, three-axle rigids need HR, semi-trailers need HC, and B-doubles and road trains need MC.

How long does it take to get an HR licence?

You need to have held a car licence for 2 years, or an LR or MR licence for 1 year. Once you’re eligible, the training and assessment can often be done in a few days, depending on the provider and how much driving experience you already have.

Can I go straight to HC?

No. To get an HC heavy vehicle licence, you must have held an MR or HR licence for at least 1 year. In WA, you also need to have held your car licence for at least 3 years.

Is it a truck license or a truck licence?

In Australia it’s “licence”. “License” is the US spelling, and in Australian English it’s only used as a verb. Both mean the same heavy vehicle licence.

Can I use an overseas truck licence in Australia?

It depends on your visa, the country your licence is from, and your state. Most overseas drivers need to convert to an Australian heavy vehicle licence, often through testing. Our guide to international licence conversion in Australia explains the process.